Mixed reality for 3D printing · Meta Quest 3 and 3S

Fit any 3D model to your world.

Found the perfect model online, but it’s the wrong size? Put it on the real thing it has to fit. Stretch, trim and combine it right there, in real millimetres, then send it to your slicer.

Recorded in the headset: three models fitted to a real couch, made into one part and printed. One minute, with music.

From a model online to a part that fits

  1. Find

    Start with the models in your Library, browse Thingiverse’s trending list or any model site in the built-in browser, or send your own files from your computer.

  2. Fit

    Put the model at true size on the thing it has to fit. It settles on tables and against walls, shows its size in mm, and is checked against your printer’s build volume.

  3. Change

    Stretch one section without distorting the rest. Trim, split and mirror. Add screw holes, magnet pockets and brackets. Join several models into one part.

  4. Print

    Export 3MF, STL or OBJ and pick the file up on your computer for your slicer. Your original files are never overwritten.

Seen through the headset

A tray model on a real couch armrest being stretched by hand, with its new length shown in millimetres
Stretch it to fit. Pull one section longer on the real armrest and read the millimetres as you go.
A holder model with the part to be cut away shown in hatched orange
Trim what you don’t need. The part to be cut away is marked before you apply.
An armrest tray with two controller holders attached, held above a desk
Three models, one part. Attach parts face to face and join them into a single printable solid.
A card in the app saying the part is 43 mm too wide for the chosen printer
Checked against your printer. You’re told when a part is too big for the bed, and by how much.
The virtual part held in front of a monitor that shows the same part in a slicer
On to your slicer. The same part, on your computer, ready to slice.
A deer model scaled up to life size in a living room
Any size, shown for real. Scale from a keyring to a life-size deer and see it before you commit the filament.

Questions

Which headset do I need?

Meta Quest 3 or Meta Quest 3S. Use your hands or the controllers.

Which printers and files?

Any FDM printer: pick yours from a list or enter its build volume. Unscaled opens STL, 3MF, OBJ and GLB / glTF files.

Do I need to know CAD?

No. You change a model by pulling it, pointing at it and typing sizes in mm. Ready-made parts such as brackets, screw holes and magnet pockets snap onto its surfaces.

Does it replace my slicer?

No. It is the step before slicing. When the part fits, you download it on your computer from the headset and open it in OrcaSlicer, Bambu Studio, PrusaSlicer, Cura, Creality Print or any other slicer.

Does it connect to my printer?

No. Unscaled hands the file to your slicer, and your slicer sends it to the printer as usual.

Where do my models go?

They stay on your headset. Downloaded and edited files are kept on the device, and a file goes to your computer only when you send it.

When will it be released?

The planned release date is 5 December 2026.

Stop printing things that almost fit.

Get one email on the day Unscaled is released.

Join the waitlist